Specialized full-service manufacturing facility featuring design, prototyping, and fabrication in the Calgary area.

CNC Machining

Seamless transition from prototypes to production of precision parts and assemblies.

GAEC Cincinnati Arrow 1250 vertical machining centers complete with:

  • 4th axis and scales on X and Y axes.
  • 21 Station Automatic Tool Changer
  • High Torque Spindle Option with 5000 RPM


X Travel (Longitudinal)50″
Y Travel (Cross)30″
Z Travel (Vertical)30″

GAEC Cincinnati Lancer 1250 CNC vertical machining centers complete with:

  • Heidhain scales on X, Y , and Z axes
  • Acramatic A2300 CNC Control w/ Color CRT, Part Program Storage, Ethernet port, RS-232 Port
  • Allen Bradley Spindle Drive, Cutter Diameter Comps
  • 30 Station Automatic Tool Changer
  • Combination Mist & Flood Coolant.


X Travel (Longitudinal)50″
Y Travel (Cross)30″
Z Travel (Vertical)30″
Table Capacity3,300 Lbs
Spindle Taper Cat50
Spindle Speeds6,000 RPM
Rapid Traverse Rate945 / 945 / 708 IPM (X/Y/Z)
Tool Changer Style Side-MountTwin-Arm
Tool Changer Capacity30 Stations

GAEC Cincinnati 10HC2500 Horizontal machining center, with indexing B axis. 100x40x30 inch travel:

  • Acramatic 850SX CNC Control w/ Color CRT, Part Program Storage, Ethernet Port, RS-232 Port
  • Allen Bradley Spindle Drive, Cutter Diameter Comps,
  • 30″ Built-in Programmable T-Slotted Rotary Table with 5 Degree Indexing (Note: This table is level with the Main T-Slotted Table for Additional Working Surface for Large Parts (100″ Overall)
  • 30 Station Automatic Tool Changer
  • Farrand Scales on X & Y Axis
  • Edge Locators, Percent Load Meter, Combination Mist & Flood Coolant


Longitudinal Travel (X Axis)100″
Vertical Travel (Y Axis)40″
Cross Travel (Z Axis)30″
Table Working Surface (T-Slotted)31″ x 66″
Table Load Capacity10,000 LBS
Rotary Table Size30″
Degree of Rotation1 Degree
Feed Rate, All Axes.5 to 150
Rapid Traverse, All Axes400 IPM
Spindle Horsepower15 HP
Spindle Speed, Range. 20 – 4000 RPM
Spindle Taper50

Haas SL40 BigBore Long bed turning center, Haas 32-Bit CNC Control with:

  • 14″ LCD Screen, RS-232c Port Interface For DNC Operation
  • hydraulic steady rest and center.
  • 7 1/8 inch bore, 36 inch swing,
  • 15″ 3-Jaw Hydraulic Through Hole Chuck With Hard Jaws,
  • 4.62 bore 4.06 bar cap 40sw x 44X
  • Control Haas


Maximum Swing Over Front Apron40″
Swing Over Cross Slide25.0″
Maximum Turning Diameter25.5″
Maximum Turning Length44.0″
X Axis Travel17.0″
Z Axis Travel44.0″
Rapid Traverse Rate X Axis710 IPM
Rapid Traverse Rate Z Axis710 IPM
Spindle Bore7.125″
Bar CapacityMax 7″
Spindle NoseA2-8
Spindle Speeds (Geared)2,400 RPM
Spindle Motor40 HP
Turret Capacity10 Station

Haas SL40 BigBore Long bed turning center, Haas 32-Bit CNC Control with:


Swing over bed24″
Max turning length78.7″
Swing over cross slide12.2″
Spindle hole diameter3.2″
3 inch bar

Manual Machining

At EGB we have an extensive array of manual machines in our facility, providing our customers with a variety of comprehensive machining services.

Lap Master Machine - Calgary Machine ShopThe Lapmaster 24 inch lapping machine meets high production requirements for component parts, and will handle up to 900 — 1/2″ diameter parts and up to 4000 — 1/4″ diameter parts per load, with the capacity to handle 3 — 9-l1/16″ diameter parts at a time

The Model 24 is also used extensively in maintenance programs for many parts such as valve seats, compressor discs, air brake and diesel injector parts, as well as aircraft engine overhauls. The flexible lap plate which can be adjusted either convex or concave permits lapping of such items as bearing pads and check or metering valve parts to true concave or convex surfaces.


Jiandaul Machine Base Size18 ” x 33-1/2″
Machine Height: Open Face46″
With Pneumatic Lifts60″
Work Table4 8″ Diameter
Lap Plate Height34″


Lap Plate Motor: 1 HP, 220-440 V, 60 Cycle, 3 Phase

Abrasive System Motor: 1/2 HP, 110 V, AC, 60 Cycle


3 Conditioning Rings4 Conditioning Rings
Lap Plate4Yz” I. D . X 24″ O.D7″ I.D. X 24 O.D
Conditioning Rings9W ‘ I.D. X llW ‘ 0.08-1/2″ I. D. X 9%” 0.D
Net Weight
Open Face1,580 Lbs1,620 Lbs
With Pneumatic Lifts1,750 Lbs1,825 Lbs
Shipping Weight
Open Face1,900 Lbs1,950 Lbs
With Pneumatic Lifts2,073 Lbs2,123 Lbs

We have an assortment of manual lathes, from 6-1/4 inch bore x 36 inch swing, to 2 inch bore x 14 inch swing.


We have manual milling machines up to 50 HP, for all your milling and finishing needs.

EGB Manufacturing has an American Radial arm drill, with a 5 foot arm x 3 1/2 inch drill in steel.

Pratt and Whitney Jig BorerPratt and Whitney 2A Jig Borer.

Complete with a 16″ tilting rotary table.

Okamoto hydraulic surface grinder, with a 12 x 24 inch table.

Hyd Mech horizontal bandsaw, H-Series saws are tough machines, designed to handle the demands of fabricators, steel service centres, machine shops, forging and die shops, and metal service centres.

H-Series cuts solids, tubing, channels, angles, aircraft grade materials, as well as non-ferrous, stainless, and Hi-Temp alloys.

This is ideal for completing multiple slugging of parts, rounds, squares and structural material.

Welding equipment that can be used on a variety of metals, including Steel, Stainless steel, Aluminum, Cast Iron, Bronze, using these methods:

Flux Core
Arc air Gouging
Hard surface overlays

Overhead cranes throughout the shop:


  • 15 Ton Broaching Press
  • 100 Ton Hydraulic Press
  • Rigid 500A Threading Machine